H3c-technologies H3C MSR 5600 Manual de usuario Pagina 196
- Pagina / 247
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
183
Ste
p
Command
Remarks
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable NetStream on the
interface.
ip netstream { inbound | outbound }
By default, NetStream is disabled on
an interface.
Configuring NetStream filtering
When you configure NetStream filtering, follow these guidelines:
• When NetStream filtering and sampling are both configured, packets are filtered first, and then the
matching packets are sampled.
• The NetStream filtering function does not take effect on MPLS packets.
To configure NetStream filtering:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number
N/A
3. Configure NetStream
filtering on the interface.
ip netstream filter acl acl-number
{ inbound | outbound }
By default, NetStream filtering is
disabled and NetStream collects
the statistics of all IPv4 packets
passing through the interface.
Configuring NetStream sampling
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Create a sampler.
sampler sampler-name mode { fixed
| random } packet-interval rate
For more information about a sampler,
see "Configuring samplers."
3. Enter interface view.
interface interface-type
interface-number
N/A
4. Configure NetStream
sampling.
ip netstream sampler sampler-name
{ inbound | outbound }
By default, NetStream sampling is
disabled.
Configuring attributes of the NetStream data export
Configuring the NetStream export format
The NetStream export format exports NetStream data in version 5 or version 9 format, and the data
fields can be expanded to contain more information, including the following:
- H3C MSR Series Routers 1
- Preface 3
- Conventions 4
- Obtaining documentation 5
- Technical support 5
- Documentation feedback 5
- We appreciate your comments 6
- Contents 7
- Ping example 14
- Tracert 16
- Prerequisites 17
- Tracert example 17
- System debugging 19
- Configuring NQA 21
- Collaboration 22
- Threshold monitoring 22
- NQA configuration task list 23
- Configuring the NQA server 23
- Enabling the NQA client 24
- Threshold types 37
- Triggered actions 37
- Reaction entry 37
- Configuring the DNS template 42
- Configuring the TCP template 43
- Configuring the FTP template 45
- NQA configuration examples 47
- Configuring NTP 72
- NTP architecture 73
- Association modes 74
- NTP security 76
- NTP for MPLS VPNs 77
- Configuration task list 78
- Enabling the NTP service 78
- Configuration procedure 100
- Network requirements 101
- Configuring SNTP 116
- SNTP configuration example 118
- Configuring SNMP 120
- SNMP operations 121
- Protocol versions 121
- Configuring SNMP logging 125
- Enabling SNMP notifications 126
- Configuration guidelines 127
- Configuration prerequisites 127
- Displaying the SNMP settings 129
- { Specify SNMPv1 130
- SNMPv3 configuration example 131
- Configuring RMON 133
- Alarm group 134
- Private alarm group 134
- Protocols and standards 135
- Configuring NETCONF 142
- NETCONF message format 143
- FIPS compliance 144
- Enabling NETCONF over SOAP 145
- Entering xml view 146
- Exchanging capabilities 146
- Subscription procedure 147
- Verifying the configuration 148
- Locking the configuration 149
- Unlocking the configuration 150
- Saving the configuration 159
- Loading the configuration 160
- Filtering data 161
- Conditional match 162
- CLI operation example 167
- Configuration example 170
- Returning to the CLI 171
- Appendix 172
- Configuring port mirroring 182
- Configuring samplers 188
- Configuring NetStream 190
- Key NetStream technologies 191
- NetStream export formats 194
- NetStream filtering 194
- NetStream sampling 194
- Flow aging methods 198
- Configuring sFlow 208
- Configuring flow sampling 209
- Configuring counter sampling 210
- Verifying the configurations 212
- Overview 213
- Log destinations 214
- Log formats 215
- Saving logs to a log file 220
- Managing security logs 222
- UNIX log host 227
- Configuring EAA 230
- Elements in a monitor policy 231
- EAA environment variables 232
- System-defined variables 233
- Configuring a monitor policy 234
- Suspending monitor policies 237
- Configuration examples 238
- Monitoring kernel threads 241
- ] [ verbose ] 243
- ] [ verbose ] 243
- Task Command 244
Relacionado con productos y manuales para Routers H3c-technologies H3C MSR 5600
Routers H3c-technologies H3C MSR 50 Manual de usuario
(239 paginas)
(239 paginas)
(19 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales