H3c-technologies H3C WA2600 Series WLAN Access Points Manual de usuario descargar pdf (Pagina 31)

5-16

z Add an account and password 00146c8a43ff.

z Select the service mac.

Figure 5-7 Add account

3) Verify the configuration

z After the client passes the MAC-and-PSK authentication, the client can associate with the AP and

access the WLAN.

z You can use the display wlan client command, display connection command and display

mac-authentication command to view the online clients.

802.1X Authentication Configuration Example

Network requirements

z As shown in Figure 5-8, an AC with IP address 10.18.1.1, an AP and a RADIUS server with IP

address 10.18.1.88 are connected through a Layer 2 switch.

z It is required to perform 802.1X authentication on the client.

Figure 5-8 802.1X authentication configuration

Configuration procedure

1) Configure the fat AP

# Enable port security, and set the authentication method of the 802.1X user to eap.

<AP> system-view

[AP] port-security enable

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Sin comentarios

H3c-technologies H3C WA2600 Series WLAN Access Points Manual de usuario Pagina 31