H3c-technologies H3C WX5500E Series Access Controllers Manual de usuario descargar pdf (Pagina 82)

Task Command

Remarks

Display log information for

event entries.

display rmon eventlog [ entry-number ] [ | { begin

| exclude | include } regular-expression ]

Available in any view.

Ethernet statistics group configuration example

Network requirements

Configure the RMON statistics group on the RMON agent in Figure 28 to gather cumulative traffic

statistics on GigabitEthernet 1/0/1.

Figure 28 Network diagram

Configuration procedure

# Configure the RMON statistics group on the RMON agent to gather cumulative statistics for

GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1

# Display statistics collected by the RMON agent for GigabitEthernet 1/0/1.

<Sysname> display rmon statistics gigabitethernet 1/0/1

EtherStatsEntry 1 owned by user1-rmon is VALID.

Interface : GigabitEthernet1/0/1<ifIndex.3>

etherStatsOctets : 21657 , etherStatsPkts : 307

etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34

etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0

etherStatsFragments : 0 , etherStatsJabbers : 0

etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0

etherStatsDropEvents (insufficient resources): 0

Packets received according to length:

64 : 235 , 65-127 : 67 , 128-255 : 4

256-511: 1 , 512-1023: 0 , 1024-1518: 0

# Get the traffic statistics through SNMP from the terminal. (Details not shown.)

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 103 104

Sin comentarios

H3c-technologies H3C WX5500E Series Access Controllers Manual de usuario Pagina 82