H3c-technologies H3C SecPath F1000-E Manual de usuario descargar pdf (Pagina 11)

[DeviceB] interface gigabitethernet 2/1

[DeviceB-GigabitEthernet2/1] ip address 2.2.2.2 255.255.255.0

[DeviceB-GigabitEthernet2/1] quit

# Create an interface named Tunnel 0.

[DeviceB] interface tunnel 0

# Configure an IP address for interface Tunnel 0.

[DeviceB-Tunnel0] ip address 10.1.2.2 255.255.255.0

# Configure the tunnel encapsulation mode as GRE over IPv4.

[DeviceB-Tunnel0] tunnel-protocol gre

# Configure the source address of interface Tunnel 0 to be the IP address of interface GigabitEthernet

2/1.

[DeviceB-Tunnel0] source 2.2.2.2

# Configure the destination address of interface Tunnel 0 to be the IP address of interface

GigabitEthernet 2/0 on Device A.

[DeviceB-Tunnel0] destination 1.1.1.1

[DeviceB-Tunnel0] quit

# Configure a static route from Device B through interface Tunnel 0 to Group 1.

[DeviceB] ip route-static 10.1.1.0 255.255.255.0 tunnel 0

Step3 Verify the configuration

# After the above configuration, display the tunnel interface status on Device A and Device B

respectively.

[DeviceA] display interface tunnel 0

Tunnel0 current state: UP

Line protocol current state: UP

Description: Tunnel0 Interface

The Maximum Transmit Unit is 1476

Internet Address is 10.1.2.1/24 Primary

Encapsulation is TUNNEL, service-loopback-group ID not set.

Tunnel source 1.1.1.1, destination 2.2.2.2

Tunnel keepalive disabled

Tunnel protocol/transport GRE/IP

GRE key disabled

Checksumming of GRE packets disabled

Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0

Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0

Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0

Last clearing of counters: Never

Last 300 seconds input: 0 bytes/sec, 0 packets/sec

Last 300 seconds output: 0 bytes/sec, 0 packets/sec

10 packets input, 840 bytes

0 input error

10 packets output, 840 bytes

0 output error

[DeviceB] display interface tunnel 0

Tunnel0 current state: UP

Line protocol current state: UP

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 79 80

Comentarios a estos manuales

Sin comentarios

H3c-technologies H3C SecPath F1000-E Manual de usuario Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad H3c-technologies H3C SecPath F1000-E