H3c-technologies H3C SecPath M9000 Series Manual de usuario descargar pdf (Pagina 6)

• The M9010 has two cable management brackets—the signal cable management brackets are

installed at the upper part of the gateway, and the power cable management brackets are installed

at the lower part of the gateway. They are installed in the same way. For more information,

see Figure 3.

• T

he power cable management bracket installation procedure for the M9014 is the same as M9010.

• The power cable management brackets of the M9006 have a slightly different structure, and

installed in a similar procedure. For more information, see Figure 4.

o install a cable management bracket:

1. Unpack the cable management brackets.

2. Attach the cable management bracket to the chassis, and align the screws with the mounting holes

on the chassis, as shown in Figure 3.

3. Fasten the s

crews.

Figure 3 Attaching cable management brackets to an M9010

(1) Attach the cable mana

ement bracket to the chassis

(2) Screw holes for installing the cable management bracket

(3) Screws for attachin

the cable mana

ement bracket to the chassis

(4) Si

nal cable mana

ement bracket (installed at the upper part of the chassis)

(5) Power cable management bracket (installed at the lower part of the chassis)

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sin comentarios

H3c-technologies H3C SecPath M9000 Series Manual de usuario Pagina 6