
18
Task Remarks
Configuring the function of dropping unknown multicast
data
Optional
Configuring IGMP report suppression Optional
Configuring maximum multicast groups that a port can
join
Optional
Configuring 802.1p precedence for IGMP messages Optional
Configuring multicast group replacement Optional
Configuring a multicast user control policy Optional
NOTE:
• In IGMP snooping view, the configuration is effective for all VLANs. In VLAN view, the configuration is
effective for only the ports that belong to the current VLAN. For a given VLAN, the confi
uration made
in IGMP snooping view is not effective if you make the same configuration in VLAN view.
• In IGMP snooping view, the configuration is effective for all ports. In Ethernet interface view or Layer 2
aggregate interface view, the configuration is effective for only the current port. In port group view, the
configuration is effective for only all ports in the current port group. For a given port, the confi
uration
made in IGMP snooping view is not effective if you make the same configuration in Ethernet interface
view, Layer 2 aggregate interface view or port group view.
• For IGMP snooping, the configuration on a Layer 2 aggregate interface does not interfere with that
on
its member ports, nor does the configuration takes part in aggregation calculations. The confi
uration
on a member port of the aggregate group will take effect after it leaves the aggregate group.
Configuring basic functions of IGMP snooping
Configuration prerequisites
Before you configure the basic functions of IGMP snooping, complete the following tasks:
• Configure the corresponding VLANs
• Determine the version of IGMP snooping
Enabling IGMP snooping
Follow these steps to enable IGMP snooping:
To do... Use the command... Remarks
Enter system view
system-view —
Enable IGMP snooping globally and
enter IGMP snooping view
igmp-snooping
Required
Disabled by default
Return to system view
quit —
Enter VLAN view
vlan vlan-id —
Enable IGMP snooping in the VLAN
igmp-snooping enable
Required
Disabled by default
Comentarios a estos manuales