H3c-technologies H3C S3100V2 Series Switches Manual de usuario descargar pdf (Pagina 26)

Step4 Unpack the load-bearing screws (packed with the rear mounting brackets), and install them to the

appropriate positions on the two sides of the switch, as shown in Figure 26.

Figure 26 Rack mounting by using front and rear mounting brackets

(1) Load-bearing screw (2) Load-bearing screw positions (select one as

needed)

(3) Switch front panel (4) Front mounting bracket

(5) Screw (packaged with the front mounting bracket)

for fixing the front mounting bracket to the switch

NOTE:

The switch provides three positions on both sides to mount a load-bearin

screw. Select a proper position

according to the actual requirements. The rear mounting brackets support the switch by the load-bearin

screws.

Step5 Determine where to install the switch to the rack, and install the cage nuts to the corresponding positions

on the front and rear rack posts.

Step6 Fix the rear mounting brackets to the rear rack posts by using the M6 screws, as shown in Figure 27.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 68 69

Sin comentarios

H3c-technologies H3C S3100V2 Series Switches Manual de usuario Pagina 26