H3c-technologies H3C WA3600 Series Access Points Manual de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 447
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
104
Static ARP configuration example
Network requirements
To enhance communication security between the AP and the router, configure static ARP entries on the
AP.
Figure 104 Network diagram
Configuration procedure
NOTE:
Before performing the following configuration, configure interface VLAN-interface 1 and log in to the web
configuration page of the AP through VLAN-interface 1.
1. Create a static ARP entry:
a. Select Network > ARP Management from the navigation tree to enter the default ARP Table
page.
b. Click Add.
c. To create a static ARP entry:
Enter 192.168.1.1 for IP Address.
Enter 00e0-fc01-0000 for MAC Address.
Select the Advanced Options box.
Enter 1 for VLAN ID.
Select GigabitEthernet1/0/1 from the Port list.
d. Click Apply.
Figure 105 Create a static ARP entry
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 446 447

Comentarios a estos manuales

Sin comentarios