H3c-technologies H3C WA3600 Series Access Points Manual de usuario descargar pdf (Pagina 360)

100

101

347

Figure 383 SET CODE

Verifying the configuration

On the AP shown in Figure 380, select Summary > Client from the navigation tree to enter the page

shown in Figure 384, w

here you can verify that the workgroup bridge is online.

Figure 384 Verify that the workgroup bridge is online

• You can see that the client with MAC address 0014-6c8a-43ff and the workgroup bridge with MAC

address 000f-e2333-5510 have been successfully associated with the AP.

• The wired devices on the right (such as printers and PCs) can access the wireless network through

the workgroup bridge.

Configuration guidelines

As shown in Figure 385, the workgroup bridge has two radio interfaces. Radio 1 connects the

workgroup bridge to the AP, and Radio 2 connects the workgroup bridge to the client. To enable the

client associated with Radio 2 to access the AP through the workgroup bridge, you need to disable

wireless user isolation on the Security > User Isolation page.

Figure 385 Network diagram

1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 446 447

Comentarios a estos manuales

Sin comentarios

H3c-technologies H3C WA3600 Series Access Points Manual de usuario Pagina 360

Comentarios a estos manuales