H3c-technologies H3C SecPath F100-C-SI Manual de usuario descargar pdf (Pagina 12)

Europe

• The supply plug must comply with CEE 7/7

(“SCHUKO”)

• The mains cord must <HAR> or <BASEC> marked

and be of type H05VVF3G0.75 (minimum)

Denmark

• The supply plug must comply with section 107-2-D1,

standard DK2-1a or DK2-5a.

Switzerland

• The supply plug must comply with SEV/ASE 1011

Argentina

• The power cord set must be certified by UL, IRAM,

TÜV (or other authorized certification body), for

three conductors cables.

• The attachment plug must be an earth-grounding

type with an IRAM-2073 (10 A, 250 V).

中国

• 电源线组件必须通过 CCC 认证。

• 使用符合 GB1002，额定值为 250V/10A 的单相

两级带接地插头

• 电源线最小线径为 0.75mm

The appliance coupler (the connector to the unit and not the connector to

the wall plug) must have a configuration for mating with an EN 60320 /

IEC 320 C13 appliance inlet.

Die Gerätesteckvorrichtung (der Anschluss an die Anlage, nicht an den

Wandstecker) muss mit einer Konfiguration nach EN 60320 / IEC 320

C13 versehen.

Electricity Safety/Elektrische Sicherheit/

用

电安全

Hazardous Voltage/Gefährliche Spannungen

/危险电压

• Conducting articles, such as a watch, hand chain, bracelet or ring should

be removed during the installation.

• Es ist nicht erlaubt während dieser Arbeiten leitende Gegenstände wie

Uhren, Armbänder, Armreifen und Ringe am Körper zu tragen.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Sin comentarios

H3c-technologies H3C SecPath F100-C-SI Manual de usuario Pagina 12