H3c-technologies H3C SecPath F5000-A5 Firewall Manual de usuario Pagina 46

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 121
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 45
36
Figure 31 Connecting the terminal to the firewall
(1) Console port (2) RJ-45 connector
(3) Console cable
IMPORTANT:
Identify the mark on the console port and make sure you are connecting to the correct port.
The serial ports on PCs do not support hot swapping. If the firewall has been powered on, always
connect the console cable to the PC before connecting it to the firewall, and when you disconnect the
cable, first disconnect it from the firewall.
Configuring communication parameters on the terminal
1. On the PC, select Start > Programs > Accessories > Communications > HyperTerminal.
2. Enter a name for the connection and click OK.
Vista de pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 120 121

Comentarios a estos manuales

Sin comentarios