H3c-technologies H3C SecPath F5000-A5 Firewall Manual de usuario descargar pdf (Pagina 83)

Slot3:

The Board is present, state is unknown

Solution

Contact your local sales agent.

Power supply system failures

Symptom 1

Symptom

The firewall cannot be powered on. The power LED on the front panel is off, which indicates that no

power is input.

Solution

1. Verify that the power switch is turned on.

2. Verify that the power cables of the firewall are correctly and firmly connected.

3. Verify that the switch of the power source is turned on.

4. Verify that the power cord is in good condition.

If the cause cannot be located in the previous steps and the problem persists, contact your local sales

agent.

Symptom 2

Symptom

The firewall cannot be powered on. The power LED on the front panel is red, which indicates that the

power module is faulty and has alarms.

Solution

1. Turn off the power switch of the firewall, and verify that the power module is firmly seated.

2. Verify that the power source meets the requirements of the firewall.

If the cause cannot be located in the previous steps and the problem persists, contact your local sales

agent.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 120 121

Sin comentarios

H3c-technologies H3C SecPath F5000-A5 Firewall Manual de usuario Pagina 83