H3c-technologies H3C SecPath F5020 Manual de usuario descargar pdf (Pagina 17)

To set the keepalive retry limit, use the timer-hold retry command.

On a slow link, increase the keepalive interval to prevent false shutdown of the interface. This situation

might occur when keepalive packets are delayed because a large packet is being transmitted on the link.

To disable sending of keepalive packets, set the keepalive interval to 0.

To configure the polling feature:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter interface view.

interface interface-type interface-number N/A

3. Set the keepalive

interval.

timer-hold seconds The default setting is 10 seconds.

4. Set the keepalive

retry limit.

timer-hold retry retry The default setting is 5.

Configuring PPP negotiation

PPP negotiation includes the following parameters:

• Negotiation timeout time

• IP address negotiation

• DNS server IP address negotiation

• ACFC negotiation

• PFC negotiation

Configuring the PPP negotiation timeout time

The device starts the PPP negotiation timeout timer after sending a packet. If no response is received

before the timer expires, the device sends the packet again.

To configure the PPP negotiation timeout time:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter interface view.

interface interface-type

interface-number

N/A

3. Configure the negotiation

timeout time.

ppp timer negotiate seconds The default setting is 3 seconds.

Configuring IP address negotiation

To configure the device as the client:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comentarios a estos manuales

Sin comentarios

H3c-technologies H3C SecPath F5020 Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad H3c-technologies H3C SecPath F5020