H3c-technologies H3C SecPath F5020 Manual de usuario descargar pdf (Pagina 24)

To enable PPP accounting:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter interface view.

interface interface-type

interface-number

N/A

3. Enable PPP accounting.

ppp account-statistics enable [ acl

{ acl-number | name acl-name } ]

By default, PPP accounting is

disabled.

Configuring the nas-port-type attribute

The nas-port-type attribute is used for RADIUS authentication and accounting. For information about the

nas-port-type attribute, see RFC 2865.

To configure the nas-port-type attribute:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter VT interface view.

interface virtual-template number N/A

3. Configure the nas-port-type

attribute.

nas-port-type { 802.11 | adsl-cap

| adsl-dmt | async | cable |

ethernet | g.3-fax | hdlc | idsl |

isdn-async-v110 |

isdn-async-v120 | isdn-sync |

piafs | sdsl | sync | virtual |

wireless-other | x.25 | x.75 |

xdsl }

By default, the nas-port-type

attribute is determined by the

service type and link type of the

PPP user (see Table 1).

Table 1 Default nas-port-type attribute

Service t

e Link t

Nas-

ort-t

e attribute

PPPoE

Layer 3 virtual Ethernet interface xdsl

Other interfaces ethernet

PPPoA Any xdsl

L2TP

Any virtual

Displaying and maintaining PPP

Execute display commands in any view and reset commands in user view.

Task Command

Display information about PPP access users.

display ppp access-user { interface interface-type

interface-number [ count ] | ip-address ip-address |

ipv6-address ipv6-address | username user-name }

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Comentarios a estos manuales

Sin comentarios

H3c-technologies H3C SecPath F5020 Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad H3c-technologies H3C SecPath F5020