H3c-technologies H3C SecPath F100-C-EI Manual de usuario descargar pdf (Pagina 19)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 1 Firewall Overvie

1-7

Table 1-4 Specifications of Ethernet interfaces

Item Description

Connector type

RJ-45

Interface type

Auto-MDI/MDIX

Frame format

Ethernet_II/Ethernet_SNAP/IEEE

802.2/IEEE 802.3

Speed and

operating mode

10/100Base-TX

Full duplex/half duplex

II. Ethernet cable

For a 10/100BASE-TX Ethernet interface, you can use a

category-5 twisted pair cable, as shown in the following figure:

Figure 1-4 Ethernet cable

Ethernet cables fall into straight-through cable and crossover

cable.

z Straight-through cable: The RJ-45 connectors at the two

ends have the same pinouts. The cable is used in the

connection between a terminal device (for example, PC) or

firewall and a HUB or LAN switch. The F100-C-FI is shipped

with straight-through cables.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 78 79

Sin comentarios

H3c-technologies H3C SecPath F100-C-EI Manual de usuario Pagina 19