H3c-technologies H3C SecPath F5000-S Firewall Manual de usuario descargar pdf (Pagina 83)

Figure 52 Cutting the cable ties

• When you bend cables, bind cables as shown in Figure 53. To avoid cable core break due to

excessive stress, do not tie up the cables in the bending area.

Figure 53 Binding the cables

• Route, bind, and attach excess cables for easy, safe maintenance activities and proper operations.

• Do not tie the power cables to the slide rails.

• When you connect a cable to an articulated part, for example, when you connect a grounding

cable to a cabinet door, leave enough slack in cables and make sure they are not stressed from any

movement of the part.

• Cables must be protected at points where they might rub or come in contact with sharp edges or

heated areas. Use high temperature cables near heat sources.

• Securely fasten cables and take adequate measures to prevent loose connections.

1 2 ... 78 79 80 81 82 83 84 85 86

Sin comentarios

H3c-technologies H3C SecPath F5000-S Firewall Manual de usuario Pagina 83