H3c-technologies H3C SecPath F1000-E Manual de usuario descargar pdf (Pagina 83)

Appendix C Arranging slots and numbering

interfaces

Arranging slots

The F1000-E/F1000-S-EI supports console, fiber, and copper ports. This chapter describes how these

interfaces are numbered.

Figure 62 Slot arrangement on the F1000-E

(1) Slot 0 (2)

Slot

(3)

Slot 2

Figure 63 Slot arrangement on the F1000-S-EI

(1) Slot 1 (2)

Slot

Numbering interfaces

Except for the console port, interfaces on the F1000-E/F1000-S-EI are numbered in the form of

interface-type X/Y, where,

• interface-type represents the type of the interface such as GigabitEthernet.

• X represents the number of the slot where the interface module resides.

• Y represents the sequence number of the interface on the interface module.

Note the following:

• Interfaces on the same interface module have the same slot number X.

• For each type of interfaces, the sequence number Y starts from 0 and increases according to the

sequence on the interface module (from left to right).

Examples

1. The fixed fiber/copper ports on F1000-E are numbered as follows:

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 94 95

Sin comentarios

H3c-technologies H3C SecPath F1000-E Manual de usuario Pagina 83