H3c-technologies H3C SecPath F1000-E Manual de usuario descargar pdf (Pagina 60)

# Create ACL rules:

a. Click the icon for ACL 2001 and then click Add.

b. Crate an ACL rule as shown in Figure 45:

Selec

t Permit as the operation.

Select Source IP Address, and enter 192.168.1.0 as the source IP address, and 0.0.0.255 as

the source wildcard.

c. Click Apply.

Figure 45 Configuring an ACL rule to permit packets sourced from 192.168.1.0/24

d. Click Add.

e. Select Deny as the operation, as shown in Figure 46.

f. Cli

ck Apply.

Figure 46 Configuring an ACL rule to deny packets

3. Configure dynamic NAT:

# Configure the address pool:

a. Select Firewall > NAT Policy > Dynamic NAT from the navigation tree, and then click Add in the

Address Pool area.

b. Add a NAT address pool as shown in Figure 47:

Enter 1 in the Index fie

ld.

Enter 5.5.5.9 as the start IP address.

Enter 5.5.5.11 as the end IP address.

c. Click Apply.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Sin comentarios

H3c-technologies H3C SecPath F1000-E Manual de usuario Pagina 60