H3c-technologies H3C SecPath F1000-E Manual de usuario descargar pdf (Pagina 61)

Figure 47 Configuring a NAT address pool

# Configure dynamic NAT:

a. In the Dynamic NAT area, click Add.

b. Configure dynamic NAT as shown in Figure 48:

Selec

t GigabitEthernet0/1.

Enter 2001 for the ACL field.

Select PAT as the address translation.

Enter 1 as the address pool index.

c. Click Apply.

Figure 48 Configuring dynamic NAT

NBT ALG configuration example

Network requirements

As shown in Figure 49, a company using the private network segment 192.168.1.0/24 wants to provide

NBT services to the outside.

Configure NAT and ALG on the SecPath so that Host A uses 5.5.5.9 as its external IP address, the WINS

server uses 5.5.5.10 as its external IP address, and Host B can access the WINS server and Host A by

using host names.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

Sin comentarios

H3c-technologies H3C SecPath F1000-E Manual de usuario Pagina 61