H3c-technologies H3C SecPath F1000-E Manual de usuario descargar pdf (Pagina 62)

Figure 49 Network diagram

Configuration procedure

1. Enable NBT ALG:

By default, the NBT ALG function is enabled, and this step is optional.

a. Select Firewall > ALG from the navigation tree.

The Application Layer Inspection tab appears, as shown in Figure 50.

b. Selec

t nbt in the Optional Application Protocols list and click the << button to add it to the

Selected Application Protocols list.

c. Click OK.

Figure 50 Configuring NBT ALG

2. Configure static NAT and the internal server:

# Configure a static address mapping:

a. Select Firewall > NAT > Static NAT from the navigation tree, and then click Add in the Static

Address Mapping area.

b. Configure a static address mapping as shown in Figure 51:

Enter 1

92.168.1.3 as the internal IP address.

Enter 5.5.5.9 as the global IP address.

c. Click Apply.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68

Sin comentarios

H3c-technologies H3C SecPath F1000-E Manual de usuario Pagina 62