H3c-technologies H3C WX6000 Series Access Controllers Manual de usuario descargar pdf (Pagina 103)

7-11

z The following log information is displayed on the terminal when the NMS performs the SET

operation to the agent.

%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:

seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus =<noError> node =

<sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>

Table 7-1 Description on the output field of SNMP log

Field Description

Jan 1 02:49:40:566 2006 The time when SNMP log is generated

seqNO Sequence number of the SNMP log ()

srcIP IP address of NMS

op SNMP operation type (GET or SET)

node Node name of the SNMP operations and OID of the instance

erroIndex Error index, with 0 meaning no error

errorstatus Error status, with noError meaning no error

value

Value set when the SET operation is performed (This field is null, meaning the

value obtained with the GET operation is not logged.)

When the value is a string of characters and the string contains characters not

in the range of ASCII 0 to 127 or invisible characters, the string is displayed in

hexadecimal. For example, value = <81-43>[hex]

The system information of the information center can be output to the terminal or to the log buffer. In this

example, SNMP log is output to the terminal. For information about the configuration of SNMP log

output to other destinations, see Information Center in the Network Management and Monitoring

Configuration Guide.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 178 179

Sin comentarios

H3c-technologies H3C WX6000 Series Access Controllers Manual de usuario Pagina 103