H3c-technologies H3C WX6000 Series Access Controllers Manual de usuario descargar pdf (Pagina 68)

5-8

The above output shows that no available route exists between AC and Device B; an available router

exists between AC and Device A; an error occurred on the connection between Device A and Device B.

In this case, you can use the debugging ip icmp command to enable ICMP debugging on AC and

Device B to check whether the devices send or receive the specified ICMP packets, or you can use the

display ip routing-table command to display whether a route exists between the two devices.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 178 179

Sin comentarios

H3c-technologies H3C WX6000 Series Access Controllers Manual de usuario Pagina 68