H3c-technologies H3C WX6000 Series Access Controllers Manual de usuario descargar pdf (Pagina 149)

11-14

To do… Use the command… Remarks

Configure optional parameters

See Configuring Optional

Parameters for an NQA Test

Group

Optional

The probe count command specifies the number of probe operations during one UDP jitter test. The

probe packet-number command specifies the number of probe packets sent in each UDP jitter probe

operation.

Configuring SNMP Tests

SNMP tests of an NQA test group are used to test the time the NQA client takes to send an SNMP

packet to the SNMP agent and receive a response.

Configuration prerequisites

Before you start SNMP tests, enable the SNMP agent function on the device that serves as an SNMP

agent. For more information abut SNMP agent configuration, see SNMP in the Network Management

and Monitoring Configuration Guide.

Configuring SNMP tests

Follow these steps to configure SNMP tests:

To do… Use the command… Remarks

Enter system view

system-view

—

Enter NQA test group view

nqa

entry

admin-name

operation-tag

—

Configure the test type as SNMP

and enter test type view

type snmp

Required

Configure the destination address

of SNMP packets

destination ip

ip-address

Required

By default, no destination IP

address is configured.

Specify the source port of SNMP

packets

source port

port-number

Optional

By default, no source port number

is specified.

Configure the source IP address of

SNMP packets

source ip

ip-address

Optional

By default, no source IP address is

specified.

The source IP address must be the

IP address of a local interface. The

local interface must be up;

otherwise, no probe packets can

be sent out.

Configure optional parameters

See

Configuring Optional

Parameters for an NQA Test

Group

Optional

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 178 179

Comentarios a estos manuales

Sin comentarios

H3c-technologies H3C WX6000 Series Access Controllers Manual de usuario Pagina 149

Comentarios a estos manuales

Relacionado con productos y manuales para Routers H3c-technologies H3C WX6000 Series Access Controllers