H3c-technologies H3C SecPath L1000-A Load Balancer Manual de usuario descargar pdf (Pagina 37)

Performing basic configurations at the CLI

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Set the system name.

sysname sysname

By default, the system name is

H3C.

3. Enable the Telnet server.

telnet server enable

By default, the Telnet server is

disabled.

4. Enter Ethernet interface

view.

interface interface-type

interface-number

N/A

5. Assign an IP address to

the interface.

ip address ip-address { mask-length |

mask } [ sub ]

By default, GigabitEthernet 0/0

has an IP address (192.168.0.1)

and the other interfaces have no IP

addresses.

6. Configure dynamic NAT.

• To create a NAT address group:

nat address-group group-number

start-address end-address [ level

level ]

• To associate the ACL to the address

group:

nat outbound acl-number

[ address-group group-number

[ vpn-instance vpn-instance-name ]

[ no-pat | port-preserved ] ] [ track

vrrp virtual-router-id ]

N/A

7. Add the interface to a

security zone.

zone name zone-name [ id zone-id ]

Five security zones are predefined

in the system: Management, Local,

Trust, DMZ, and Untrust.

import interface interface-type

interface-number [ vlan vlan-list ]

By default, GigabitEthernet 0/0

belongs to the management zone,

and other interfaces do not belong

to any zone.

8. Return to the upper-level

view.

quit N/A

9. Save the running

configuration.

save [ safely ] N/A

10. Display the running

configuration.

display current-configuration N/A

Performing basic configurations in the Web interface

Configuring the system name for the L1000-A

1. Log in to the Web interface, and select System > Device Management > Device Basic Info from

the navigation tree.

Figure 27 Configuring the system name

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

Comentarios a estos manuales

Sin comentarios

H3c-technologies H3C SecPath L1000-A Load Balancer Manual de usuario Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad H3c-technologies H3C SecPath L1000-A Load Balancer