H3c-technologies H3C SecPath L1000-A Load Balancer Manual de usuario descargar pdf (Pagina 66)

Item Descri

tion

Transceiver module type SFP+

Number of interfaces 2

Compliant standard 802.3ae

Physical layer 10GBASE-R/W

Interface speed LAN PHY mode: 10.3125 Gbps

Lightning protector for a network port (optional)

If part of the network cable of a network port must be routed outdoors, connect a lightning protector to

the cable before you plug the cable into the port.

The specifications for the lightning protector for a network port are as follows: 1000 M port protective

unit–single port, maximum discharge current (8/20s waveform): 3 kA, output voltage: core-core < 15

V, core-ground < 350 V.

For how to install a lightning protector for a network port, see "Installing a lightning protector for a

net

work port."

Power strip with lightning protection (optional)

If part of the AC power line is routed outdoors, use a power strip with lightning protection to connect the

AC power cord of the device to the AC power line to protect the device from being damaged by

lightning strikes.

The specifications for the power strip with lightning protection are as follows: Maximum discharge

current: 6500 A, protection voltage: 220 VAC to 500 VAC.

For how to connect the AC power supply to a power strip with lightning protection, see "Connecting the

C power supply to a power strip with lightning protection."

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 83 84

Sin comentarios

H3c-technologies H3C SecPath L1000-A Load Balancer Manual de usuario Pagina 66